 HVAC Mesh Cages
A range of weather-protected, steel mesh guards for protection of outdoor condensing units against vandalism and accidental damage. Four sizes available to suit all brands of condensing units.
|
|
|
|
Simple to install.
Cost effective security solution.
FREE DELIVERY! (UK Mainland only).
Colour/Finish: All components receive an 8-phase epoxy-polyester powder coating, with scratch-resistance, textured finish in a colour (RAL7032) to match most brands of condensing unit.
Please Note: The components are supplied as standard low-wall mounting models (As above illustration). Additional base panels (similar to the top panel) are available; these maybe desired for high-wall mounted installations. Additional back panels (similar to the front panel) are available; these will be required for floor
|
|
Dimensions (External) |
Dimensions (Internal) |
|
|
Part Code |
Size |
Height |
Width |
Depth |
Height |
Width |
Depth |
Weight |
Additional
Base Panel |
Additional
Front/Back Panel |
CG-S |
Small |
750 mm |
1050 mm |
460 mm |
720 mm |
1020 mm |
450 mm |
18 kg |
CG-BPS |
CG-FPS |
CG-M |
Medium |
1150 mm |
1150 mm |
650 mm |
1120 mm |
1120 mm |
640 mm |
30 kg |
CG-BPML |
CG-FPM |
CG-L |
Large |
1450 mm |
1150 mm |
650 mm |
1420 mm |
1120 mm |
640 mm |
33 kg |
CG-BPML |
CG-FPL |
CG-XL |
X-Large |
1800 mm |
1150 mm |
650 mm |
1770 mm |
1120 mm |
640 mm |
44 kg |
CG-BPML |
CG-FPXL |
|
|
| Part Code |
Description |
Unit Price |
| CG -S |
Small Security Guard |
£195.00 |
| CG-BPS |
Additional Base Panel for Small Guard |
£45.00 |
| CG-FPS |
Additional Front/Back Panel for Small Guard |
£65.00 |
| |
|
|
| CG-M |
Medium Security Guard |
£295.00 |
| CG-BPML |
Additional Base Panel for Medium Guard |
£49.00 |
| CG-FPM |
Additional Front/Back Panel for Medium Guard |
£85.00 |
| |
|
|
| CG-L |
Large Security Guard |
£345.00 |
| CG-BPML |
Additional Base Panel for Large Guard |
£49.00 |
| CG-FPL |
Additional Front/Back Panel for Large Guard |
£99.00 |
| |
|
|
| CG-XL |
Extra Large Security Guard |
£445.00 |
| CG-BPML |
Additional Base Panel for Large Guard |
£49.00 |
| CG-FPXL |
Additional Front/Back Panel for Large Guard |
£99.00 |
| |
|
|
|
All prices exclude VAT but include delivery to mainland UK |
|
Guidance on installation
1. This product should be fitted by a fully-trained installer of refrigeration or air conditioning equipment.
2. This product is designed for use with all makes of condensing units. Ensure that the guard you have
ordered is the correct size for your condensing unit.
3. The purpose of this product is to protect the condensing unit against reasonable levels of vandalism
and accidental damage.
4. Whilst this product is sufficiently robust for its purpose, it is not designed to be load-bearing, and should
not be used to support excessively heavy items.
5. Where possible, this product should be installed at the same time as the condensing unit.
6. Where a guard is fitted retrospectively, the location of supply services may hinder installation, and it is
expected that parts of the guard structure may have to be removed in order to facilitate the installation.
In these cases, care must be taken to ensure that the rigidity of the structure is not compromised.
7. Where possible, it is recommended that the isolator switch is located within the security guard. The
dimensions of this guard have been chosen specifically to accommodate this.
|
|
|
Step by Step installation instructions
1. Using four of the Allen-headed bolts connect the support arms to the wall frame. The wall frame
has two small protrusions in each of its four corners to help you locate the arms in the correct position.
2. Place the wall frame in the required location and mark the wall for the fixing holes. The wall frame offers
10 possible positions for the wall fixings and 4 fixings are provided. Ideally you should use the fixing
holes towards the corners of the frame.
3. Drill holes in the wall in the locations marked, and insert the wall anchor bolts into the holes drilled.
4. Hook the wall frame onto the anchor bolts and tighten the nuts to secure.
5. Slide the top panel and side panels into the grooves on the support arms. (Slots are provided in
the wall frame into which the top and side panels should locate.)
6. Fit the front panel to the support arms using the remaining four sets of Allen-headed bolts and
spring washers. (Slots are provided in the front panel into which the top and side panels should
locate.)
|
|
|
High Wall Mounting Units
If you have purchased an additional base panel for a high-wall mounted installation, this should be installed
between steps 5 & 6.
It is possible to assemble the complete guard at ground level and then simply hook it onto the pre-inserted
wall fixings. This facility can be beneficial in circumstances where high wall assembly is difficult.
|
|
|
Floor standing units
If you have purchased an additional back panel for a floor-standing installation, this should be connected to
the support arms at Step 1, instead of the wall frame.
The extra back panel is supplied with four brackets
which should be connected to the front and back panels, at each of the four bottom corners of the guard.
These brackets can then be used for securing the guard to the floor.
|
|
|
Maintenance
These guards are designed to allow quick and easy access for maintenance of the condensing unit. Simply
reverse Steps 6 and 5 to obtain complete access to the condensing unit.
|
|
|
VRF Cages
These guards are designed to allow quick and easy access for maintenance of the condensing unit. Simply
reverse Steps 6 and 5 to obtain complete access to the condensing unit.
CG-VRF-BP (Base Pack)
CG-VRF-BP and CG-VRF-EP-12 (Base Pack and Extender Pack Large)
| Overall Guard Dimensions |
Order Requirements |
| Height |
Width |
Depth |
CG-V-BP |
CG-V-EP-6 |
CG-V-EP-12 |
| 2000 mm |
1160 mm |
1200 mm |
1 |
0 |
0 |
| 2000 mm |
1740 mm |
1200 mm |
1 |
1 |
0 |
| 2000 mm |
2320 mm |
1200 mm |
1 |
0 |
1 |
| 2000 mm |
2900 mm |
1200 mm |
1 |
1 |
1 |
| 2000 mm |
3780 mm |
3780 mm |
1 |
0 |
2 |
| 2000 mm |
4060 mm |
4060 mm |
1 |
1 |
2 |
|
|
Dimensions (External) |
Dimensions (Internal) |
|
| Part Code |
Description |
Height |
Width |
Depth |
Height |
Width |
Depth |
Weight |
| CG-VRF-BP |
BASE PACK |
2000 mm |
1160 mm |
1200 mm |
1970 mm |
1130 mm |
1200 mm |
70 kg |
| CG-VRF-EP-6 |
EXTENDER PACK - Small |
2000 mm |
580 mm |
1200 mm |
1970 mm |
N/A |
1200 mm |
27 kg |
| CG-VRF-EP-12 |
EXTENDER PACK - Large |
2000 mm |
1160 mm |
1200 mm |
1970 mm |
N/A |
1200 mm |
42 kg |
CG-VRF-BP |
Base Pack |
£745.00 |
CG-VRF-BP |
Extender Pack -Small |
£349.00 |
CG-VRF-EP-12 |
Base Pack |
£495.00 |
|
|
